石墨烯包覆碳纳米管-硫(CNT-S)复合材料及锂硫电池性能
Preparation of Graphene Coated Carbon Nanotube-Sulfur Composite and Its Performance for Lithium-Sulfur Battery
作者单位E-mail
郑加飞 南京航空航天大学, 材料科学与技术学院, 纳米材料研究所, 南京 210016  
郑明波 南京大学, 微结构国家实验室, 电子科学与工程学院, 南京 210093 zhengmingbo@nju.edu.cn 
李念武 南京航空航天大学, 材料科学与技术学院, 纳米材料研究所, 南京 210016  
吕洪岭 南京航空航天大学, 材料科学与技术学院, 纳米材料研究所, 南京 210016  
邱兰 南京航空航天大学, 材料科学与技术学院, 纳米材料研究所, 南京 210016  
曹洁明 南京航空航天大学, 材料科学与技术学院, 纳米材料研究所, 南京 210016 jmcao@nuaa.edu.cn 
姬广斌 南京航空航天大学, 材料科学与技术学院, 纳米材料研究所, 南京 210016  
摘要: 针对锂硫电池研究与实际应用中遇到的主要问题,本文通过一种简单有效的水热法还原氧化石墨烯对商用碳纳米管-硫(CNT-S)纳米复合材料进行包覆,形成一种可有效抑制多硫聚合物扩散的石墨烯包覆结构。X射线衍射(XRD),扫描电子显微镜(SEM)表征结果表明硫均匀地负载在碳纳米管上,并且在CNT-S复合材料外表面包覆有一层石墨烯。电化学测试结果表明,这种包覆结构能显著提高CNT-S复合材料的锂硫电池性能。
关键词: 石墨烯  锂硫电池  碳纳米管  
基金项目: 国家自然科学基金(No.51202106,No.51172109)及江苏省自然科学基金(No.BK2010497)资助项目。
Abstract: To solve the main problems encountered in the lithium-sulfur battery research and practical application, a simple and effective hydrothermal reduction of graphene oxide was employed to encapsulate commercial carbon nanotube-sulfur (CNT-S) nanocomposite in this study, then an effective type of graphene coated CNT-S nanostructure was formed. The polysulphide anions diffusion phenomenon was effectively restrained by the graphene coating structure. The nanocomposites were characterized by X-ray diffraction and scanning electron microscope. The results indicated that elemental sulfur was uniformly distributed across the CNT, and a layer of graphene coated on the surface of CNT-S nanocomposite. The electrochemical test results showed that the graphene coating nanostructure obviously improved the lithium-sulfur battery performance of the CNT-S nanocomposite.
Keywords: graphene  lithium-sulfur battery  carbon nanotube  sulfur
投稿时间:2013-01-10 修订日期:2013-03-15
摘要点击次数:  3952
全文下载次数:  2950
郑加飞,郑明波,李念武,吕洪岭,邱兰,曹洁明,姬广斌.石墨烯包覆碳纳米管-硫(CNT-S)复合材料及锂硫电池性能[J].无机化学学报,2013,29(7):1355-1360.
查看全文  查看/发表评论  下载PDF阅读器
Support information: