甲苯热解机理的AM1研究(Ⅰ)热力学分析
AM1 Thermodynamic Research of the Pyrolysis Mechanism of Toluene(Ⅰ)
作者单位
王惠 西北大学化学系, 陕西省物理无机化学重点实验室, 西安710069 
杨海峰 西北大学化学系, 陕西省物理无机化学重点实验室, 西安710069 
冉新权 西北大学化学系, 陕西省物理无机化学重点实验室, 西安710069 
文振翼 西北大学现代物理研究所, 陕西省物理无机化学重点实验室, 西安710069 
史启祯 西北大学化学系, 陕西省物理无机化学重点实验室, 西安710069 
摘要: 在实验的基础上,本文用Gaussian98程序包中AM1法UHF计算,对碳材料用碳前驱体甲苯的热裂解反应机理进行了研究。在对反应物、产物自由基的结构进行能量梯度法全优化的同时,计算了不同温度下的标准热力学参数(298~1073K)。热力学计算结果表明:(1)当甲苯的热裂解温度相对较低时(773K左右),热力学计算结果首先支持苯环上甲基C-H键的断裂生成苄基自由基并继而生成联二甲苯的反应;随着温度的提高(达1073K时),生成苯自由基和甲基自由基的反应比例将大于生成苄基自由基的比例;该反应机理与实验结果基本一致。(2)采用Gaussian98程序包中AM1法中的UHF计算,较适合低级芳香烃热裂解反应机理的理论研究。
关键词: 碳材料  甲苯  热裂解机理  热力学参数  AM1计算
基金项目: 博士后基金及陕西省教委专项基金资助项目(No.99JK100)。
Abstract: Based on the experiment, the pyrolysis mechanism of the carbon matrix precursor toluene used for carbon material was studied with semi empirical method AM1 of Gaussian 98 package,the equilibrium geometry of the reactants and free radicals were optimized. The standard thermodynamic parameters in different temperatures range were calculated. The thermodynamic calculation results show: when the pyrolysis temperature of toluene is relatively low(below 1073K),C-H bonds of the methyl on the benzene ring is broken firstly, and the reaction path of producing phenylmethyl is the main one(path 1).With temperature increasing(being above 1073K), C-C bond between phenyl and methyl is easy broken,the reaction path that produces phenyl and methyl is a chief one(path 2). This mechanism is in accord with the experiment. When studying the pyrolysis carbonization mechanism and initial pyrolysis carbonization reaction process of low molecularly organic compounds used quantum chemistry calculation theory, semi empirical method AM1 is still an efficient method.
Keywords: carbon material  toluene  pyrolysis mechanism  thermodynamic parameters  AMI computation
投稿时间:2001-02-10 修订日期:2001-04-06
摘要点击次数:  1136
全文下载次数:  2170
王惠,杨海峰,冉新权,文振翼,史启祯.甲苯热解机理的AM1研究(Ⅰ)热力学分析[J].无机化学学报,2001,17(4):538-544.
查看全文  查看/发表评论  下载PDF阅读器
Support information: