二茂铁酰腙镍配位聚合物热解产物的表征
Characterization of Products by Pyrolysis of Ferrocenylacylhydrazone-Nickel Coordination Polymer
作者单位
林云 四川师范大学化学与材料科学学院成都 610066 
朱世富 四川大学材料与工程学院成都 610065 
赵北君 四川大学材料与工程学院成都 610065 
林展如 四川师范大学化学与材料科学学院成都 610066 
摘要: 二乙酰二茂铁间苯二甲酰腙与NiCl2·6H2O在DMSO中反应合成了二乙酰二茂铁间苯二甲酰腙镍配位聚合物(PFZNi),将其在空气中高温(500~1 200 ℃)热解,并用XRD、XPS、SEM和超导量子强磁计(SQUID)对热解产物进行表征。结果表明,产物是一种纳米NiFe2O4·Fe3O4混合型反尖晶石结构的铁磁相固溶体。在5 K及300 K时,产物有较高的饱和磁化强度(分别为42.57和39.05 emu·g-1)和较低的剩磁(分别为6.87和6.27 emu·g-1),其磁参数随热解温度而增加。
关键词: 二茂铁  配位聚合物  热解  表征
基金项目: 
Abstract: A diacetylferrocenyl isophthalicdihydrazone-Nickel coordination polymer (PFZNi) was synthesized using diacetylferrocenylisophthalic dihydrzone and NiCl2·6H2O as the raw materials in DMSO solvent, and then it was pyrolyzed at high temperatures (500~1 200 ℃) under air, the product was characterized by XRD, XPS, SEM and SQUID. It is found that the product prepared by pyrolysis was a ferromagnetic solid solution with the mixed-type inverse spinel microstructure of nanocrystalline NiFe2O4·Fe3O4. When magnetized by an external field at 5 K and 300 K, it exhibits a higher saturation magnetization (Ms=42.57 and 39.05 emu·g-1) and lower residual magnetism (Mr=6.87 and 6.27 emu·g-1), respectivity, their magnetic parameters increse with pyrolysic temperature.
Keywords: ferrocene  coordination polymer  pyrolysis  characterization
 
摘要点击次数:  1079
全文下载次数:  1534
林云,朱世富,赵北君,林展如.二茂铁酰腙镍配位聚合物热解产物的表征[J].无机化学学报,2006,22(6):1013-1018.
查看全文  查看/发表评论  下载PDF阅读器
Support information: