钽离子掺杂对LiFePO4 / C物理和电化学性能的影响
Effects of Ta Ion Doping on the Physical and Electrochemical Performance of LiFePO4/C
作者单位
杨书廷 河南师范大学化学与环境科学学院新乡 453007
河南省新能源材料工程研究中心新乡 453007 
刘玉霞 河南师范大学化学与环境科学学院新乡 453007
河南省新能源材料工程研究中心新乡 453007 
尹艳红 河南师范大学化学与环境科学学院新乡 453007
河南省新能源材料工程研究中心新乡 453007 
王辉 河南师范大学化学与环境科学学院新乡 453007
河南省新能源材料工程研究中心新乡 453007 
王涛 河南省新能源材料工程研究中心新乡 453007
新乡市中科科技有限公司新乡 453002 
摘要: 采用PAM(聚丙烯酰胺)模板-溶胶凝胶法在惰性气氛下合成钽掺杂的LiFePO4/C复合正极材料,考察了钽对目标化合物的物理和电化学性能的影响。研究结果表明,0.33C的电流下充放电时,掺杂前后第2个循环的放电容量分别为138.6 mAh·g-1和155.5 mAh·g-1,循环20次后容量为141 mAh·g-1和156 mAh·g-1。电化学交流阻抗表明,掺杂后的材料阻抗Rct从180 Ω减小到120 Ω。振实密度比掺杂前提高0.312 g·cm-3
关键词: 掺杂  LiFePO4/C  正极材料  模板-溶胶凝胶法
基金项目: 
Abstract: Ta-doped LiFePO4/C cathode material was synthesized through a Polyacrylamide (PAM) template-sol-gel reaction in an inert atmosphere. Effects of Ta5+ doping on the physical and electrochemical performances of the cathode materials were investigated. At 0.33C discharge rate, the secondly reversible specific capacity of the Ta-doped LiFePO4/C is nearly 17 mAh·g-1 higher than that of the undoped one. After 20 cycles, the capacity of the former is 156 mAh·g-1, 15 mAh·g-1 higher than that of the latter. Impedance Rct of the Ta-doped material is 120 Ω, while that of the undoped material is 180 Ω. The tap density of Ta-doped material was improved by 0.312 g·cm-3 compared with undoped one.
Keywords: doping  LiFePO4/C  cathode material  template-sol-gel reaction
 
摘要点击次数:  1045
全文下载次数:  1379
杨书廷,刘玉霞,尹艳红,王辉,王涛.钽离子掺杂对LiFePO4 / C物理和电化学性能的影响[J].无机化学学报,2007,23(7):1165-1168.
查看全文  查看/发表评论  下载PDF阅读器
Support information: