强烈阳极氧化法快速制备多孔氧化铝模板
Fast Fabrication of Porous Anodic Aluminum Oxide Template by Hard Anodization
作者单位
孙晓霞 太原理工大学新材料界面科学与工程教育部重点实验室太原 030024
太原理工大学材料科学与工程学院太原 030024 
黄 平 太原理工大学新材料界面科学与工程教育部重点实验室太原 030024
太原理工大学理学院物理系太原 030024 
梁 建 太原理工大学新材料界面科学与工程教育部重点实验室太原 030024
太原理工大学材料科学与工程学院太原 030024 
赵君芙 太原理工大学新材料界面科学与工程教育部重点实验室太原 030024
太原理工大学材料科学与工程学院太原 030024 
许并社 太原理工大学新材料界面科学与工程教育部重点实验室太原 030024
太原理工大学材料科学与工程学院太原 030024 
摘要: 
关键词: 氧化铝模板  阳极氧化    有序度  孔径
基金项目: 
Abstract: In the electrolyte of oxalic acid/alcohol/aqueous solution, highly-ordered porous anodic aluminum oxide(AAO) template was fabricated by hard anodization. The surface morphology and the structure of AAO template were characterized by Field-Emission Scanning Electron Microscope(FE-SEM) and XRD, respectively. The effects of different factors including alcohol type, ratio of alcohol to water, and oxalic acid concentration on the ordering degree and pore diameter of AAO template were investigated. Under the glycol to water ratio of 1∶1(by volume) with an oxalic acid concentration of 0.5 mol·L-1, and voltage at 160 V, the obtained AAO template was hexangular arrangement with pore diameter of 80 nm and pores spacing of 120 nm, the growth rate was 51.9 μm·h-1.
Keywords: anodic aluminum oxide (AAO)  anodization  alcohol  ordering degree  pore diameter
 
摘要点击次数:  1232
全文下载次数:  2453
孙晓霞,黄 平,梁 建,赵君芙,许并社.强烈阳极氧化法快速制备多孔氧化铝模板[J].无机化学学报,2008,24(9):1546-1550.
查看全文  查看/发表评论  下载PDF阅读器
Support information: