| 钛酸钠纳米带的合成、表征与气敏性能(英文) |
| Synthesis, Characterization and Gas-sensing Properties of Sodium Titanate Nanobelts |
|
| 摘要: 通过钛酸丁酯与氢氧化钠浓溶液的两步水热反应合成出宽度为20～240 nm、厚度为10～40 nm、长度达几十微米的单一物相的Na2Ti3O7纳米带。用X-射线衍射和电子显微镜分别表征了它们的结构和形貌。这些纳米带被加工成化学电阻型传感器以测量气敏特性。测试表明在350～400 ℃之间对丙酮、乙醇和二硫化碳具有明显感应，而对一氧化碳、苯、氨气和30%的甲醛水溶液几乎不敏感。用化学吸附模型解释其气敏机理。 |
| 关键词: 水热合成； 钛 氧化物； 纳米带； 气敏传感器 |
| 基金项目: |
| Abstract: Single-phase Na2Ti3O7 nanobelts with a width of 20～240 nm, a thickness of 10～40 nm, and a length up to tens of micrometers were synthesized by a two-step hydrothermal reaction of butyl titanate with a concentrated NaOH solution. The structures and morphologies of the nanobelts were characterized by X-ray diffraction and transmission electron microscopy, respectively. Then the nanobelts were fabricated into a chemiresistive sensor for its gas-sensing properties evaluation. The results indicate that the sensor is obviously sensitive to acetone, ethanol, and carbon disulfide at 350～400 ℃ while it is almost insensitive to CO, benzene, NH3, and 30% formaldehyde solution. The gas-sensing mechanism could be explained by chemisorption model. |
| Keywords: hydrothermal synthesis titanium oxides, nanobelts gas sensors |
| |
| 摘要点击次数: 1241 |
| 全文下载次数: 1739 |
| 陶友荣,张玉玲,温乐乐,吴兴才.钛酸钠纳米带的合成、表征与气敏性能(英文)[J].无机化学学报,2008,24(10):1570-1575. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| Support information: |
|
|
|
|
|
|
