钛酸锌的制备及其对高氯酸铵热分解的催化性能
Preparation of Nanometer ZnTiO3 Powder and Its Catalytic Performance for Thermal Decomposition of Ammoniam Perchlorate
作者单位
杨行浩 中北大学化工与环境学院太原 030051 
张景林 中北大学化工与环境学院太原 030051 
王作山 中北大学化工与环境学院太原 030051 
摘要: 
关键词: 钛酸锌  溶胶-凝胶法  AP  热分解  催化性能
基金项目: 
Abstract: ZnTiO3 nanocrystals were prepared by sol-gel method, using Zn(NO3)2 and Ti(C4H9O)4 in the topic. The as-prepared ZnTiO3 nanocrystals were characterized by XRD, FTIR and TEM, and the catalytic performance of ZnTiO3 nanocrystals of different contents for the ammonium perchlorate(AP)decomposition was investigated by thermal analysis. The results indicate that ZnTiO3 with pure cube structure can be synthesized at 600 ℃ by this procedure,which was spheroid with particle size of about 60~100 nm. The results expressed that the low temperature decomposition peaks of AP is advanced by 17 ℃ and the high temperature decomposition peaks of AP is advanced by 24 ℃ when adding 5% nanoparticle ZnTiO3 powder. The catalytic effects of ZnTiO3 powders on the high temperature decomposition of AP are less than that of nanometer metal powders, but all the micron metal powders decrease the low decomposition temperature of AP.
Keywords: zinc titanate  sol-gel method  ammonium perchlorate(AP)  thermal decomposition  catalytic performance
 
摘要点击次数:  1441
全文下载次数:  1537
杨行浩,张景林,王作山.钛酸锌的制备及其对高氯酸铵热分解的催化性能[J].无机化学学报,2009,25(11):2062-2065.
查看全文  查看/发表评论  下载PDF阅读器
Support information: