微波固相法快速制备氮掺杂石墨烯
Preparation of Nitrogen-Doped Graphene with Solid Microwave Method
作者单位E-mail
王凯 School of Automation Engineering, Qingdao University, Qingdao, Shandong 266071, China wkwj888@163.com 
季炳成 School of Electrical Engineering, Dalian University of Technology, Dalian, Liaoning 116023, China  
韩美佳 Southwest Municipal Engineering Design & Research Institute of China  
李立伟 School of Automation Engineering, Qingdao University, Qingdao, Shandong 266071, China  
摘要: 以鳞片石墨为原料,首先通过Hummers法制备氧化石墨,再将洗涤至中性的氧化石墨分散液与乙二胺反应得到功能化石墨烯。干燥后的功能化石墨烯在微波辐照下能瞬间产生高热,促使接枝的乙二胺分子分解并实现对石墨烯原位掺杂制备出氮掺杂石墨烯。利用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)、X射线衍射(XRD)、X射线能谱(EDS)对样品的形貌、结构和组成进行了表征。结果表明:该合成途径能成功实现对氧化石墨烯的还原和掺杂,所合成的氮掺杂石墨烯呈现透明绢丝状结构。
关键词: 石墨烯  氮掺杂  微波固相法
基金项目: 国家863高科技项目(No.2012AA110407)和山东省科技发展计划(No.2011GGB01123)资助项目
Abstract: Graphite oxide was synthesized via Hummers method with flake graphite as raw material. After centrifugation and washing to clean out the remnant slat, ethylenediamine (EDA) was added into the dispersion to react with graphene oxides giving rise to functional graphene sheets (FGS). The dried FGScan interact with microwaves strongly, producing superheating which results in decomposing the grafted EDAmolecules and in-situ doping graphene sheets. The morphology, structure, and components of the as-produced graphene were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), energy dispersion spectrum (EDS). The results showed that nitrogen-doped graphene sheets (NGS) can be successfully synthesized via this strategy. The synthesized nitrogen-doped graphene was transparent.
Keywords: graphene  nitrogen-doped  solid microwave
投稿时间:2013-03-13 修订日期:2013-05-19
摘要点击次数:  2669
全文下载次数:  3033
王凯,季炳成,韩美佳,李立伟.微波固相法快速制备氮掺杂石墨烯[J].无机化学学报,2013,29(10):2105-2109.
查看全文  查看/发表评论  下载PDF阅读器
Support information: