不同烧结温度对PMN基铁电陶瓷B位有序度的影响
Effect of Sintering Temperature on B-Site Order of Pb(Mg1/3Nb2/3)O3-Based Ferroelectric Ceramics
作者单位E-mail
杨超 State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China  
刘敬松 State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China liujingsong@swust.edu.cn 
张敏芳 State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China  
游美容 State Key Laboratory Cultivation Base for Nonmetal Composite and Functional Materials, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China  
摘要: 本文研究了不同烧结温度下,CuO添加对0.94PMN-0.06PT(PMN-6PT)弛豫铁电陶瓷B位化学有序度的影响。拉曼和XRD分析结果表明,不同的烧结温度下,离子取代不同,对B位有序度的影响不同。烧结温度在950℃时,主要是Cu2+进入晶格,不影响B位化学有序度;烧结温度在1080℃时,主要是Cu1+进入晶格,B位化学有序度改变。介温测试所表现出来的弛豫特性与拉曼分析有序度的结果相一致。
关键词: 烧结温度  弥散度  有序度  拉曼分析
基金项目: 四川省教育厅青年基金(No.09ZB095)资助项目
Abstract: The effect of CuOdoping on B-site order of 0.94Pb(Mg1/3Nb2/3)O3-0.06PbTiO3 (abbreviated as PMN-6PT) ceramics with different sintering temperatures was studied. The Raman and XRDresults revealed that under different sintering temperature, ion substitution was different, which had different influence to B-site order. Sintering temperature at 950 ℃, Cu2+ ions entered the crystal lattice and made no difference in the B-site order. However, Sintering temperature at 1080 ℃, Cu1+ ions entered the crystal lattice and had an effect in the B-site order. The dependence of dielectric constant on temperature illustrated an obvious relaxor characteristic for CuOdoped PMN-based ceramics, which was in accord with Raman spectra analysis.
Keywords: sintering temperature  diffuseness parameter  B-site order  Raman spectra
投稿时间:2013-03-19 修订日期:2013-05-16
摘要点击次数:  1888
全文下载次数:  1624
杨超,刘敬松,张敏芳,游美容.不同烧结温度对PMN基铁电陶瓷B位有序度的影响[J].无机化学学报,2013,29(10):2145-2149.
查看全文  查看/发表评论  下载PDF阅读器
Support information: