MoO3纳米带/RGO复合材料的制备及其电化学性能研究
MoO3 Nanobelts/Reduced Graphene Oxide (RGO) Composites as a High-Performance Anode Material for Lithium Ion Batteries
作者单位E-mail
纪文旭 南京大学化学化工学院, 介观化学教育部重点实验室, 南京 210093  
吴迪 南京大学化学化工学院, 介观化学教育部重点实验室, 南京 210093  
杨蓉 南京大学化学化工学院, 介观化学教育部重点实验室, 南京 210093  
丁维平 南京大学化学化工学院, 介观化学教育部重点实验室, 南京 210093  
彭路明 南京大学化学化工学院, 介观化学教育部重点实验室, 南京 210093 luming@nju.edu.cn 
摘要: 以水杨酸为模板剂和还原剂,采用水热法制备得到了一种MoO3纳米带/RGO复合材料。利用XRD、SEM、TEM、拉曼光谱、恒流充放电、交流阻抗等手段对样品的结构、形貌以及电化学性能进行表征。测试结果表明,MoO3纳米带/RGO复合材料作为锂离子电池负极材料,在50 mA·g-1的电流密度下可逆比容量为1 000 mAh·g-1,循环50次后比容量还保持在950 mAh·g-1,相比于MoO3纳米带其容量保持能力和循环性能得到了显著改善。
关键词: MoO3纳米带  还原氧化石墨烯  锂离子电池  负极材料
基金项目: 国家重大科学研究计划青年科学家专题(No.2013CB934800);国家自然科学基金(No.21222302)资助项目。
Abstract: MoO3 nanobelts/RGO composites were obtained through a facile and efficient hydrothermal procedure by using organic compound sodium salicylate as both structure-directing agent and reducing agent. The crystal structure, morphologies and electrochemical performances of the as-prepared samples were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, galvanostatic charge/discharge test and electrochemical impedance spectroscopy (EIS). The hybrid material shows a high specific capacity of 1 000 mAh·g-1 with a good cycling stability as an anode material for lithium ion batteries, which has a much enhanced performance compared to bare MoO3 nanobelts.
Keywords: MoO3 nanobelts  reduced graphene oxide (RGO)  lithium ion batteries  anode materials
投稿时间:2014-11-18 修订日期:2015-01-22
摘要点击次数:  1985
全文下载次数:  2329
纪文旭,吴迪,杨蓉,丁维平,彭路明.MoO3纳米带/RGO复合材料的制备及其电化学性能研究[J].无机化学学报,2015,31(4):659-665.
查看全文  查看/发表评论  下载PDF阅读器
Support information: