不同加铝方式对SAPO-34分子筛合成及MTO催化性能的影响
Influence of the Manner of Adding Aluminum Source on the SAPO-34 Molecular Sieves Synthesis and the MTO Catalytic Properties
作者单位E-mail
李晓峰 太原理工大学精细化工研究所, 太原 030024 lixiaofeng6008@163.com 
王平 太原理工大学精细化工研究所, 太原 030024  
梁光华 太原理工大学精细化工研究所, 太原 030024  
狄春雨 太原理工大学精细化工研究所, 太原 030024  
李志宏 太原理工大学精细化工研究所, 太原 030024  
王龙 太原理工大学精细化工研究所, 太原 030024  
窦涛 太原理工大学精细化工研究所, 太原 030024
中国石油大学中国石油天然气集团催化重点实验室, 北京 102249 
 
摘要: 在水热合成体系中,以三乙胺(TEA)和四乙基氢氧化铵(TEAOH)为混合模板剂,考察了在初始凝胶形成过程中铝源的加入方式对合成SAPO-34分子筛及甲醇制烯烃(MTO)催化性能的影响;通过X射线衍射(XRD)、扫描电子显微镜(SEM)、氮气等温吸附脱附(BET)、29Si固体核磁(29Si MAS NMR)、氨气程序升温脱附(NH3-TPD)等方法对合成产物进行物性表征,并研究了其在甲醇转化制烯烃(MTO)反应中的催化性能.结果表明,随着首先加铝量的增加,粒径有逐渐变小的趋势,且逐渐出现板层状形貌的SAPO-34分子筛;同时,产物分子筛骨架中Si(4Al)配位结构的数量增加,强酸比例在逐渐增大,且酸密度增加;随着强酸比例和酸密度的提高,SAPO-34分子筛在MTO催化反应中的寿命逐渐延长,丙烯选择性逐渐增大而乙烯选择性逐渐减小.
关键词: SAPO-34分子筛  成胶  加铝方式  酸性  MTO
基金项目: 国家重点基础研究发展规划"973"项目(No.2004cB217806)、国家自然科学基金(No.20973123)和山西省火炬计划(No.2014061002-01)资助项目.
Abstract: In hydrothermal synthesis system, with triethylamine(TEA) and tetraethyl ammonium hydroxide(TEAOH) as the mixed template agent, the influence of the manner of adding aluminum in the preparation of the initial gel on the SAPO-34 molecular sieves synthesis and the catalytic performances of methanol to olefins(MTO) reaction was investigated. The products were characterized using X-ray diffraction(XRD), scanning electron microscopy(SEM), Nitrogen isothermal adsorption stripping(BET), 29Si MAS NMR and NH3-TPD. The catalytic performances of methanol to olefins(MTO) were also investigated. The results showed that the particle size of SAPO-34 molecular sieve became smaller and the cubic morphology gradually turned into sheet-like, with the increased of the first addition amount of aluminum, and the proportion of Si(4Al) species in the as-synthesized SAPO-34 increased, the amount of strong acidity and the acid density also increased. The results also showed that the lifetime of SAPO-34 molecular sieve in MTO reaction is gradually extended, the ethylene selectivity decreases and the propylene selectivity increases with the increasing of the first addition amount of aluminum source.
Keywords: SAPO-34 molecular sieve  gelling  the manner of adding aluminum source  acidic property  MTO
投稿时间:2015-10-31 修订日期:2016-01-11
摘要点击次数:  1662
全文下载次数:  1521
李晓峰,王平,梁光华,狄春雨,李志宏,王龙,窦涛.不同加铝方式对SAPO-34分子筛合成及MTO催化性能的影响[J].无机化学学报,2016,32(3):450-456.
查看全文  查看/发表评论  下载PDF阅读器
Support information: