Br-掺杂Bi2WO6的水热法合成及其可见光催化性能
Hydrothermal Synthesis and Visible-Light Photocatalytic Performance of Br- Doped Bi2WO6
作者单位E-mail
张田 桂林理工大学材料科学与工程学院, 桂林 541004  
邹正光 桂林理工大学材料科学与工程学院, 桂林 541004
有色金属及材料加工新技术教育部重点实验室, 桂林 541004 
 
何金云 桂林理工大学材料科学与工程学院, 桂林 541004
有色金属及材料加工新技术教育部重点实验室, 桂林 541004 
 
龙飞 桂林理工大学材料科学与工程学院, 桂林 541004
有色金属及材料加工新技术教育部重点实验室, 桂林 541004 
longf@glut.edu.cn 
王吉林 桂林理工大学材料科学与工程学院, 桂林 541004
有色金属及材料加工新技术教育部重点实验室, 桂林 541004 
 
莫淑一 桂林理工大学材料科学与工程学院, 桂林 541004
有色金属及材料加工新技术教育部重点实验室, 桂林 541004 
 
摘要: 以Bi(NO33·5H2O和Na2WO4·2H2O为主要原料,采用水热法合成了纯相Bi2WO6,并对其进行非金属离子Br-掺杂改性。采用XRD、SEM、TEM、XPS、Raman、PL和DRS研究了Br-掺杂对Bi2WO6的物相结构、形貌和可见光催化性能的影响。结果表明,Br-掺杂可有效提高Bi2WO6的可见光催化性能,当掺杂量(物质的量百分数)为8%时,溴掺杂Bi2WO6的光催化性能最好,可见光照射40 min后,可降解96.73%的罗丹明-B,与未掺杂Bi2WO6相比,其降解率提高了36.32%。
关键词: 钨酸铋  水热法合成  Br掺杂  可见光催化
基金项目: 国家自然科学基金(No.51662005)和广西自然科学基金(No.2014GXNSFFA118004)资助项目
Abstract: Br- ions doped Bi2WO6 was prepared using bismuth nitrate Bi(NO3)3·5H2O and sodium tungstate Na2WO4·2H2O as raw materials by hydrothermal synthesis method. The effect of Br- doping on the phase structure, morphology and visible light catalytic properties of Bi2WO6 was investigated using XRD, SEM, TEM, XPS, Raman, PL and DRS. The results indicated that the visible-light-driven photocatalytic performance of Bi2WO6 was greatly enhanced after Br- doping. When Br- was doped with 8% of the amount (percentage of amount of substance), the Bi2WO6 photocatalyst displayed the best photocatalytic performance. It could decompose 96.73% RhB after 40 minutes irradiation, which was 36.32% higher than that of the pristine one.
Keywords: Bi2WO6  hydrothermal synthesis method  Br doping  visible-light-driven photocatalytic performance
投稿时间:2016-11-11 修订日期:2017-03-17
摘要点击次数:  1870
全文下载次数:  1782
张田,邹正光,何金云,龙飞,王吉林,莫淑一.Br-掺杂Bi2WO6的水热法合成及其可见光催化性能[J].无机化学学报,2017,33(6):954-962.
查看全文  查看/发表评论  下载PDF阅读器
Support information: