凹凸棒石/g-C3N4-AgFeO2复合材料制备及其光催化性能
Synthesis and Photocatalytic Performance of Attapulgite/g-C3N4-AgFeO2 Composites
作者单位E-mail
谢登裕 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
蒋亿 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
纪媛媛 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
殷明慧 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
盛振环 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
赵伟 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
殷竟洲 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
李乔琦 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
仲慧 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300  
张莉莉 淮阴师范学院化学化工学院, 江苏省低维材料化学重点实验, 江苏省环境功能材料工程实验室, 淮安 223300 zll@hytc.edu.cn 
摘要: 以凹凸棒石(简称凹土,ATP)为基体,通过原位化学法一步直接合成g-C3N4薄层材料,并将其有效固载于凹土表面(ATP/g-C3N4),再通过原位沉淀法引入不同比例AgFeO2纳米颗粒,构筑系列兼具磁分离特性和高效光催化活性的ATP/g-C3N4-AgFeO2-Y复合光催化剂(Y=wATP/g-C3N4/(wATP/g-C3N4+wAgFO2)×100%,表示ATP/g-C3N4在ATP/g-C3N4-AgFeO2复合材料中所占的质量百分数)。采用XRD、SEM、BET、UV-Vis、PL和ICP表征其结构和物化性能,以酸性红G(ARG)为目标降解物,研究其光催化性能。研究发现:通过形成Si-O-C键,g-C3N4薄层被均匀固定在凹土表面;AgFeO2纳米颗粒均匀沉积于ATP/g-C3N4表面并形成Z型异质结,ATP/g-C3N4-AgFeO2-Y具有比ATP/g-C3N4和AgFeO2更优异的可见光光催化性能,且随着ATP/g-C3N4含量的增大呈先升高而后下降的趋势;当Y=57%时复合材料的性能最佳,ATP/g-C3N4-AgFeO2-57%对20 mg·L-1酸性红G的降解率可达97.4%,循环4次使用后,降解率仍保持94.2%。通过自由基捕获实验研究了光催化反应机理,发现·O2-是光催化过程的主要活性物种。
关键词: 物理化学  无机非金属材料  可见光催化  凹凸棒石  类石墨相氮化碳  铁酸银
基金项目: 国家自然科学基金(No.51472101)、江苏省自然科学基金(No.BK20161305)、江苏省六大人才高峰(No.JY-31)和江苏省高校大学生创新计划(No.201710323004Z)资助项目
Abstract: Attapulgite (ATP) was chosen as the matrix of g-C3N4 thin layer and AgFeO2 nanoparticles to fabricate a series of ATP/g-C3N4-AgFeO2-Y composites presenting both magnetic separation and high photocatalytic activity by in-situ chemical method, where Y stands for the mass percentage of ATP/g-C3N4 in the composite (Y=wATP/g-C3N4/(wATP/g-C3N4+wAgFO2)×100%). XRD, SEM, BET, UV-Vis, PL and ICP were used to characterize the structure and physicochemical properties of the products. Photodegradation of acid red G (ARG) was chosen as target to investigate the photocatalytic property of all the products. It was found that g-C3N4 thin layer was uniformly fixed on the surface of the ATP by forming a Si-O-C bond, while the AgFeO2 nanoparticles were deposited on the surface of ATP/g-C3N4 uniformly to form a type Z heterojunction structure. ATP/g-C3N4-AgFeO2-Y presented higher visible light photocatalytic performance than that of ATP/g-C3N4 and AgFeO2. The photocatalytic activity of ATP/g-C3N4-AgFeO2-Y changed with the content of ATP/g-C3N4, and when Y=57%, ATP/g-C3N4-AgFeO2-57% shows the best photocatalytic activity. The degradation rate of 20 mg·L-1 acid red G was up to 97.4%, and it remained at 94.2% after 4 cycles when catalyzed by ATP/g-C3N4-AgFeO2-57%. The photocatalytic mechanism was studied by free radical trapping experiments. It was found that·O2- is the main active species in the photocatalytic process.
Keywords: physical chemistry  inorganic nonmetallic materials  visible light photocatalysis  attapulgite  g-C3N4  AgFeO2
投稿时间:2018-08-18 修订日期:2018-12-17
摘要点击次数:  1726
全文下载次数:  700
谢登裕,蒋亿,纪媛媛,殷明慧,盛振环,赵伟,殷竟洲,李乔琦,仲慧,张莉莉.凹凸棒石/g-C3N4-AgFeO2复合材料制备及其光催化性能[J].无机化学学报,2019,35(2):236-244.
查看全文  查看/发表评论  下载PDF阅读器
Support information: