Au@g-C3N4支架的制备及其光催化性能
Preparation and Photocatalytic Performances of Au@g-CC3N4 Scaffold
作者单位E-mail
林青 金陵科技学院材料工程学院, 南京 211169 lnqing@jit.edu.cn 
刘苗苗 金陵科技学院材料工程学院, 南京 211169  
吴禧航 金陵科技学院材料工程学院, 南京 211169  
黎水平 扬州大学建筑工程学院, 扬州 225127  
汪园园 金陵科技学院材料工程学院, 南京 211169  
胡学敏 金陵科技学院材料工程学院, 南京 211169  
王威 金陵科技学院材料工程学院, 南京 211169  
张小娟 金陵科技学院材料工程学院, 南京 211169  
摘要: 以三聚氰胺、甲醛、尿素等原料合成具有可塑性的三聚氰胺树脂,通过发泡法构建前驱体支架,并通过磁控溅射法在支架表面沉积金,550℃下热聚合后,成功制备得到负载Au的石墨相氮化碳(Au@g-C3N4)支架,其比表面积可达1 480 m2·g-1。负载6%Au后,Au@g-C3N4支架的紫外吸收光谱在550nm处出现了新的吸收峰,吸收带边红移至507nm,禁带宽度缩小至2.45eV,Au@g-C3N4支架荧光强度和阻抗显著降低,光电流从0.28μA·cm-2提升至0.62μA·cm-2。负载Au既拓宽了Au@g-C3N4支架可见光吸收性能,又抑制了电子-空穴对的复合,光催化性能稳定,光催化降解罗丹明B的降解率提高近1倍。此外,Au@g-C3N4支架强度适中,具有一定韧性,在光催化领域应用中便于回收和再利用。
关键词: 石墨相氮化碳    支架  光催化
基金项目: 国家自然科学基金青年基金(No.51902145)和江苏省自然科学基金面上项目(No.BK20191112)资助。
Abstract: The plastic melamine-formaldehyde, which was synthesized from melamine, formaldehyde, and urea, was used as the precursor for the formation of the melamine-formaldehyde scaffold by the microwave foaming method. Then, Au was deposited on the melamine-formaldehyde scaffold by the magnetron sputtering. Finally, Au deposited graphite carbon nitride (Au@g-C3N4) scaffold with a specific surface area of 1 480 m2·g-1 was successfully prepared by the thermal polymerization at 550 ℃ . After deposited 6% Au, the UV-Vis spectrum of Au@g - C3N4 scaffold showed a new absorption peak at 550 nm, its absorption band edge was shifted to 507 nm, and its bandgap was reduced to 2.45 eV. Moreover, the fluorescence intensity and the electrochemical impedance decreased significantly, and the photocurrent increased from 0.28 to 0.62 μA·cm-2. The deposition of Au not only widens the UV-Vis absorption performance of Au@g-C3N4 scaffold but also inhibits the recombination of the electron-hole pairs. The photocatalytic performance of Au@g-C3N4 scaffold was stable, and its photocatalytic degradation rate for rhodamine B was about one time higher than that of g-C3N4 scaffold. Additionally, the Au@g-C3N4 scaffold would be easy to recycle and be reused in the applications, because the Au@g-C3N4 scaffold has suitable tensile strength and toughness.
Keywords: graphitic carbon nitride  Au  scaffold  photocatalysis
投稿时间:2021-09-29 修订日期:2022-01-20
摘要点击次数:  1881
全文下载次数:  1006
林青,刘苗苗,吴禧航,黎水平,汪园园,胡学敏,王威,张小娟.Au@g-C3N4支架的制备及其光催化性能[J].无机化学学报,2022,38(4):589-598.
查看全文  查看/发表评论  下载PDF阅读器
Support information: 相关附件:   file支持信息